1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | SUS wire 3m (nylon coated) |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
2 x | Locking cable tie 2.5x100 (uds) |
2 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Steering arm 12 mm Ø 4 mm |
2 x | Cockpit plastic closing |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
2 x | Canopy Latch |
2 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
2 x | Surface Indicator Gauge Small |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
2 x | Angle of incidence meter |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | One touch canopy lock |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Angle measurer |
1 x | Truck-trailer for gliders 720 x 239 mm |
2 x | WingFix ULTRA Black Edition |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Propeller balancer |
2 x | Pine wood slat 2.0x2.0x1000 mm |
2 x | Mahogany wood slat 2.0x2.0x1000 mm |
3 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
3 x | BALSA trip 8.0x8.0x1000 mm |
4 x | BALSA trip 6.0x6.0x1000 mm |
2 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | SE Ring 350 mm (2 pcs) |
1 x | SE Ring 480 mm (2 pcs) |
1 x | SE Ring 240 mm (2 pcs) |
1 x | SE Ring 200 mm (2 pcs) |
2 x | Ferrita con funda |
1 x | Tape GFK 50 mm |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Foil for sticking flaps and ailerons |
1 x | Tape GFK 38 mm |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | Tape GFK 25 mm |
2 x | Ferrita 14x8x5.5 mm |
2 x | SE Ring HACKER 300 mm (2 pcs) |
2 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | SE Ring 360 mm (2 pcs) |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Marker ties (20 pcs) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
2 x | Parachute P4 |
3 x | Ballast 700gr OPALE |
1 x | Windsock Ozone L -1200 mm |
1 x | Windsock Ozone L - 700 mm |
1 x | Aramid 50 daN 50 m |
1 x | LUCAS pilot ARTF |
1 x | Para-RC Mix |
1 x | Opale Rucksack |
1 x | Parachute BACKUP X100 |
1 x | Para-RC Trike "RC-Bullix" |
1 x | Rescue 1,8m2 / BackPack |
1 x | Paramotor Trike XL |
1 x | Paramotor BackPack XXS (without accessories) |
1 x | Paramotor Kit Camo H1.5/ Ben Red |
1 x | Cabel charger transmitter GRAUPNER |
1 x | Oratex Natural White 20m |
1 x | 2 LiPo XH>EH adapter |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | 1000 ml sealer (DOPE) |
1 x | 800TVL CMOS camera for FPV |
1 x | Carbon fiber rod 0.8 mmx1000 mm |
1 x | 120x60 mm SLH KOVO wheel |
1 x | DLE 30 complete electronic ignition |
1 x | Ignition bed V2 Red color |
1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
1 x | Aluminium ignition bad (blue) |
1 x | Field folding model stand |
1 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
1 x | Electromotor starter EME 35cc |
1 x | Aluminium ignition bad (red) |
1 x | 250 mm / 16 mm Airbrakes |
1 x | EME 55 cc carburetor WALBRO |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
3 x | Propeller POWER-PROP 7x7 |
1 x | Pushrod octagone 4/3 with coupler M3 |
1 x | 100 mm rods set for direction control |
1 x | Snap short M2 (10 uds) |
1 x | Lead with adhesive (2 pcs) |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | 28x5 mm wires output (2 pcs) |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Tip wing protector 30x10 (2 pcs) |
2 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Balsa panel 1.0x100x1000 mm |
2 x | BALSA trip 3.0x3.0x1000 mm |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
2 x | BALSA trip 10x10x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
2 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | Balsa panel 3.0x100x1000 mm |
1 x | PowerBox SparkSwitch RS |
1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
1 x | SWTU2 switch |
1 x | SBEC 40 |
1 x | SPS 70V 140/280 A |
1 x | Opto Gas Engine Kill Switch |
1 x | Opto Gas Engine Kill Switch |
1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
1 x | TrainerCord (master-learner) |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | SBEC Jeti |
1 x | wing/fuselage connector for 3 pines AWG 20-24 |
1 x | Motor DA 150 |
2 x | Motor DA 50-R |
1 x | Spring Clip Ø25 mm |
3 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Balsa panel 8.0x100x1000 mm |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
3 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
2 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | A/C quality beech plywood 600x300x8.0 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | |
1 x | SE Ring 300 mm (2 pcs) |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Set cintas unión paracaídas 145 cm |
2 x | Propeller FIALA 15x8 3-Blade |
1 x | R617 FS 2,4 GHz receiver |
1 x | Ant. Cable R606/17/08/14FS L:1500mm |
1 x | Receiver FUTABA R6004 FF FAST |
2 x | DUPLEX 2.4 EX MBar |
1 x | DUPLEX 2.4EX Expander E4 |
1 x | Frontal support Speed 280 |
1 x | Fan for A60 |
2 x | Antenna holder bracket double |
1 x | Black 2,4 GHz antenna exit guides (2 pcs) |
2 x | FIALA Propeller 19x12 Electric |
1 x | Futaba R3008SB T-FHSS 2.4GHz S.Bus2 8/32 Channel Receiver |
2 x | Receptor FUTABA R7003SB FASST |
2 x | R6106 HF 2,4 GHz receiver |
1 x | Antena FUTABA receptor Standard 2.4 GHz ( 160 mm aprox.) |
1 x | Receiver FUTABA R7014SB FASST Test |
1 x | Receiver R7008SB FASSTest |
1 x | |
1 x | Receiver FUTABA R7108SB FASSTest/FASST |
1 x | Futaba R7114SB 2.4GHz FASTT/FASSTest S.BUS Receiver |
1 x | Antena FUTABA receptor Standard 2.4 GHz ( 200 mm aprox.) |
1 x | DUPLEX 2.4EX MSpeed PITOT <300 Km/h |
1 x | DUPLEX 2.4EX MFlow2 Gas 800 |
1 x | MT 125 temperature sensor |
1 x | DUPLEX 2.4EX Expander E2 |
1 x | DUPLEX TGs 2,4 GHz (transmitter module) |
2 x | DUPLEX 2.4 EX MVario2 |
1 x | DUPLEX 2,4GHz MRPM-AC EX |
2 x | Duplex 2.4 EX TopFuel MTAG Battery Reader |
1 x | DUPLEX 2.4EX RC Power Switch 10 |
2 x | AddCAP 10AS capacitors |
2 x | DUPLEX 2,4GHz MRPM EX |
1 x | DUPLEX 2.4EX RC Switch |
1 x | DUPLEX MUI 50 Sensor |
1 x | Axi for MVVS 3.5 Sport |
1 x | Motor mount for 1 m models |
1 x | A50 Motor Mount Alu complete set |
1 x | Radial mount for electric 2.5-5.6 |
1 x | 9x4.7 * 22x12 carbon propeller |
1 x | Size "M" motor holder for class 400 |
1 x | Central support Speed 280 |
1 x | Powerset FunJet 2 with Vectorcontrol unit |
1 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Connectors MPX female |
1 x | Metalic motor holder for class 550-600 |
2 x | 1804 2400KV Brushless Motor Qav 250 mini |
1 x | Motor A60-5XS V4 28-pole kv420 |
1 x | Motor A40-10 L V2 14-Pole Glider |
1 x | A50 Backmountset complete V3/V4 |
1 x | Motor A60-6XS V4 28-pole kv370 |
1 x | A40 Backmountset complete |
1 x | Combo RAY C3542-1000 + ESC 60A |
1 x | Motor A30-14 M V2 6 Poles |
1 x | Bearings for motors hacker A50 |
1 x | Motor ORBIT 20-12 with coolingfan |
1 x | Motor A40-14 L 14-Pole V4 |
1 x | Motor A60-7XS V4 28-pole kv330 |
1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Triple rod con. 2mm Pushrod (2 pcs) |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | FESTO connector M7 barb fitting XL Tygon |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
1 x | Circlick securite |
2 x | Motor DA 170 |
1 x | Motor DA 60 |
1 x | Motor DA 85 |
2 x | Motor D.A. 200 Magnesium |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Exhaust elbow for SAITO FA65/72/80/82a/91S/100/ |
1 x | MAX pilot ARTF |
1 x | FESTO connector M7 Quick 6mm 90º |
1 x | Check valve quick hose connector 4-4 mm |
1 x | FESTO connector M7 Quick 4 mm |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | Extra hard 1500 ccm complete gasoline fuel tank |
1 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
1 x | CC 03 |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | 4 LiPo XH>EH adapter |
1 x | Connector Sub-D 2+5 Female |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | Cabling for Fox MDM1 wings |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | Motor DA 120 |
1 x | Wheel collar 4 mm Ø (4 uds) |
1 x | Stickers-digit for marking |
1 x | Sparkplug Champion RCJ-7Y for ZG |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Ferrita 17x10x6.5 mm |
2 x | Crystal TX 35.180 Ch 78 |
2 x | Crystal TX 35.100 Ch 70 |
1 x | Propeller POWER-PROP 11x9 |
1 x | Receiver Futaba R1008SB 8-channel 2.4 GHz FHSS |
1 x | DUPLEX 2.4EX MT 125 temperature sensor |
1 x | MASTER 16x10 tree blades propeller |
1 x | DUPLEX 2,4EX Stick with 3-Position Switch for Transmitter DC/DS |
1 x | FIALA Propeller 16x6 |
1 x | DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch |
1 x | DUPLEX 2.4EX Satellite receiver Rsat 2 |
1 x | Propeller MASTER 7x6 |
1 x | 6x4 tree blades propeller |
1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch |
1 x | FIALA Propeller 24x8 |
2 x | GLOW 9C + accesories |
1 x | Propeller MENZ-S 20x10 3 blades |
1 x | 3-blades 24x12 carbon prop Super Silence |
1 x | Propeller MENZ-S 16x8 |
1 x | Propeller MASTER 6x3 |
1 x | Propeller POWER-PROP 12x8 |
1 x | FIALA Propeller 20x8 |
1 x | Propeller MASTER 7x3 |
1 x | Propeller MASTER 6x3,5 |
1 x | Propeller MASTER 7x5 |
1 x | Propeller MASTER 5,5x4,5 |
1 x | Racor 4/3 mm |
1 x | Propeller MENZ-S 21x8 3-Blades |
1 x | Propeller MENZ-S 18x10 |
1 x | Crystal RX 35.120 Ch 72 |
1 x | Crystal TX 35.010 Ch 61 |
1 x | Motor 2212 (1000KV) Quadcopter F450 |
1 x | DUPLEX 2.4EX MUI 150 Sensor |
1 x | Receptor FUTABA R3106GF T-FHSS |
1 x | Car Charger DC/DS-16 |
1 x | FIALA Propeller 18x8 |
1 x | Propeller POWER-PROP 13x8 |
1 x | Battery RX JETI LiIon RB 2600 7.2v |
1 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
1 x | FIALA Propeller 23x10 |
1 x | 10x7 tree blades propeller |
1 x | Propeller MASTER AIRSCREW 9x6 |
1 x | FIALA Propeller 28x10 |
1 x | DSM 10 Dual Switch Mixer |
1 x | Caps multicolor Switch JETI |
1 x | Duplex 2.4EX tray transmitter DC-16 II Black multimode |
1 x | Propeller POWER-PROP 15x8 |
1 x | GLOW 5C + accesories |
1 x | Field folding model stand SebArt |
1 x | White 2,4 GHz antenna exit guides (2 pcs) |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | Maleta transporte FUTABA 10PX |
1 x | XH male balance (2S) connector (2 pcs) |
1 x | Transmitter SPEKTRUM DX-9 (Only TX) |
1 x | Propeller hub spacer 8/5.5 |
1 x | Propeller MENZ-S 19x10 |
1 x | Propeller MENZ-S 15x8 3 blades |
1 x | Propeller MENZ-S 20x8 |
1 x | Propeller MENZ-S 21x12 |
1 x | 3-blades 20x10 carbon prop Super Silence |
|
35,913.66EUR |