61.90EUR

LiPo TopFuel ECO-X 5000 mAh 2s 35C MTAG
[HK95000261]


LiPo TopFuel ECO-X 5000 mAh 2s 20C MTAG

Product description and features
In the meantime proven a thousand times the ECO-X cells are perfectly balanced between ampacity, weight and durability.
The battery is readymade soldered with the XT90-S connector system with anti-spark function and is perfectly suitable for the rough everyday use.
It can be used in all aircraft or ship models as well as in the R/C car scene.
Connections
XT90-S connector with gold contacts anti-spark function, suitable up to 90 amps permanent current
XH balancer connector
Safety when connecting
XT90-S connector with integrated anti-spark function which prevents the spark when connecting the controller.

Internal chip for battery telemetry
Battery data such as type, number of cells, capacity, C-rate or battery ID are stored on the passive MTAG chip. If desired* these values can be read out with an external NFC sensor such as the HACKER or JETI MTAG and be transferred to the transmitter telemetry system.
The built-in MTAG chip also offers the possibility of manually or automatically counting and storing the charging cycles. By using several identical batteries in serial or parallel operation, so more effective active battery management is possible.
*Note: It is up to the user if he wants to use the MTAG function or not. The TopFuel battery can be used without MTAG function like any ordinary battery.
Voltage Indicator technology
The TopFuel battery is delivered with the proven Voltage Indicator technology. At the press of a button, the battery charge status is displayed via four differently colored LEDs. The Voltage Indicator helps you to assess the condition of your battery at any time.
Optimized ex works
The special manufacturing process, where the batteries are pressed during filling, makes these cells up to 10 percent thinner and more robust than comparable cells with the same capacity and ampacity.
Specifications
Battery type LiPo
Cells 2S
Nominal voltage [V] 7,4
Capacity [mAh] 5000
C rate 35C
Dimensions and Weight
Length [mm] 140
Width [mm] 43
Height [mm] 22
Weight [g] 296


temporarily out of stock
temporarily out of stock

Reviews

Customers who bought this product also purchased
Servo HITEC HS-82 MG
Servo HITEC HS-82 MG

temporarily out of stock
temporarily out of stock

XT-90  connector (pair)
XT-90 connector (pair)

temporarily out of stock
temporarily out of stock

SE Ring 480 mm (2 pcs)
SE Ring 480 mm (2 pcs)

temporarily out of stock
temporarily out of stock

Sealing Iron Sleeve STD
Sealing Iron Sleeve STD

temporarily out of stock
temporarily out of stock

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
    A123 LiFe Batteries
    Accesories
    AIRSOFT Battery
    Lead batteries
    LiIo Batteries
    LiPo Batteries->
      E-Flite
      Gens Ace
      KAVAN
      RAY/FOXY
      ROBBE
      ROI IMPORT
      SPEKTRUM
      TopFuel
    NiMH/NiCd Batteries
    Battery Testers
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x 20,5x14,5 Falcon electric V2 (40 g)
1 x ABS I Strip 20x10x1000 mm
1 x Strip 2,0x2,0x330 mm
1 x Motor ST 7-160 B
1 x Cer clip DA-50R, DA-60 DA-100 DA-100L DA-120, 1 piece
3 x Carb Carrier, red DA-85, DA-100L and DA-120
1 x Crankcase Gasket set for DA-60 / DA-120
2 x Carburator spacer block DA-50R
1 x Cylinder for DA-60 and DA-120
1 x Bearing upper rod DA-50R, DA-60, DA-100, DA-100L, DA-120
1 x DA-50R Prop Hub
1 x Dia. 25x5 mm tefon tube for escape
1 x Cylinder for DA-85/170 (1 piece)
1 x Motor Moki 180
2 x Drilling-template set for Moki engines Moki S150, S180, S215, S2
3 x Motor Moki S 400 cc 5 cylinders
1 x Motor Moki S 250 cc 5 cylinders
2 x Escape Moki 100 BVT
2 x Air filter MOKI
3 x Baffles for Radial Moki S180/320 mm
1 x Motor Moki S 300 cc 5 cylinders
1 x Moki Exhaust Bend 200 mm
1 x DLE 55-RA Muffler
1 x Exhaust pipe BX 155 Right
1 x Escape O-Ring ZIMMERMANN FG-84/90 R3
1 x Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th
1 x Propeller set 400 (2R+2L)
1 x Soporte grifo FESTO vertical (1 pcs)
2 x Support conector MPX (6 pcs)
2 x Support pump Xicoy X45
1 x Gasket, Aluminium-Plate >reed valve carrier DA-170
2 x Gasket, from reed valve carrier to carb carrier DA-150L/170
1 x Stainless steel silencer for DA 150/150L
1 x Ignition for DA-50-R, DA-60, DA-85
2 x Carburator screw DA50/60/100/120
1 x Aluminium-screw, M5x20mm Red
1 x Reed valves with doubler, set for DA 85/100/120
1 x Carburador DA-35, DA-50R-DA-100L , VM-60/70
1 x L ELBOW DA-120 normal(2 pcs)
1 x Reed valve carrier, without reed valves DA-150L/170
2 x Aluminium-Plate, carb>reed valve carrier, DA-85 DA-100L and DA-1
1 x Piston pin for DA-60 DA-120
2 x Motormount DA-100, DA-100L and DA-120
1 x Carb spacer mounting block ,red DA-60/70
2 x Pick up DA50/100/150
1 x Aluminium-screw, M5x16mm Red
1 x Ignition unit for DA-70/100/120/150/170/200
2 x Reed valve for DA 50-R
1 x Cylinder DA-50R, DA-100, DA-100L
1 x Propeller plate for DA-120 / DA-170 / DA-150 New Version
2 x Piston ring for DA-85 and DA-170
2 x BOSCH spark plug cap for DA 50-R, DA 100 and DA 150
1 x Prop hub for DA 150/200, old version
1 x Intake tube with flange and 2 M5x60
1 x Gasket for motor DA 50-R
3 x Piston ring for DA-50R and DA-100
1 x Piston for DA-50R, DA-100, DA-100L
1 x Stainless Steel Mini Pipe for Titan ZG 20 and ZG 23
2 x Silencer ZG62, new version
2 x Prop washer for ZG45SL, ZG62/S/SL and ZG74B/ZG80B
1 x Plastic intake RAM tube for ZG 20 and 26
1 x Silencer kit ZG 45/62
1 x Sparkplug cap red, with spring ZG26SC, ZG26SCM and ZG231SLH
1 x Prop shaft ZG 23SL and ZG 26SC
1 x Regler autostarter MOKIS250
3 x Pick up for motor Moki 250 cc 7 cylinders
1 x Moki Pushrod S250 (1 pcs)
2 x Carburator Moki S 180
1 x Stainless Steel Silencer side outlet for ZG 20/23/26
1 x ZENOAH ZG26 SCM Marine Engine
1 x Reduction gear 2.8:1 for ZG 38 inline version
1 x Muffler ZG 38/S/SC
1 x Piston ring for ZG 26SC/EI, ZG 26SCM ZG 26SLH and Zenoah G260RC/
1 x Aluminium wide washer M3 gold (4 pcs)
1 x Aluminium cap bolt washer M4 blue (8 pcs)
2 x 12 mm floating pad (49 pcs)
1 x Aluminium wide washer M3 blue (4 pcs)
1 x ABS tube 12.0x10.0x1000 mm
1 x ABS Strip 1.5x8.0x1000 mm
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x ABS Strip 1.5x2.0x1000 mm
1 x ZENOAH ZG 26SC with magneto ignition
1 x Moki Carburetor Throttle Arm with Extension
1 x Motor Moki S 250 cc 5 cyl with autostarter
1 x Flange gasket MOKI carburetor
1 x MOKI S250 Intake Bend
1 x Futaba External voltage input cable Futaba CA-RVIN-700
1 x Cross Connector 4.0 mm x 1000 mm
1 x Profile ABS triangular 4.0x1000 mm 90º
1 x Profile ABS triangular 6.0x1000 mm 90º
1 x Strip 1,5x1,5x330 mm
2 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x PPM Encoder Module
1 x 2,4x1000 mm 2:1 black termoretract tube
1 x Extension silicon 10 cm (Futaba)
1 x ABS angle 10,0x10,0x1000 mm
1 x ABS angle 4,0x4,0x1000 mm
1 x MPX-Dean "T" Adapter
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x Glases Innovation Plus
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x 3 LiPo XH>EH adapter
2 x SE Ring 400 mm (2 pcs)
1 x 18 mm reinforced hinge
1 x Strip 3,5x1,75x330 mm
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x DYNAMOMETER S-1580
1 x Profile ABS half cane 2.0x1000 mm
1 x 5 LiPo XH>EH adapter
1 x Cable coupler M3 (10 uds)
1 x Cable S.BUS 3 salidas 300 mm
1 x 105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
2 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x Presto SF Light Filler styrene-free (420 g)
1 x 12,7x1000 mm 2:1 green termoretract tube
1 x Dean "T" - Futaba Adapter
1 x Profile ABS Square 2 x 1000 mm
1 x Cable coupler M2,5 (2 pcs)
1 x CC 01
1 x Ferrita 17x10x6.5 mm
1 x Micro flex hinge (12 uds)
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Canopy Latch
1 x M3 Maxi ball link (2 uds)
1 x Aluminun wheel collar 6 mm Ø (4 uds)
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x 100 mm rods set for direction control
1 x 38x4,5 mm wires output (2 pcs)
1 x Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
3 x Blind nut M4 (4 pcs)
1 x 200m servo "Premium" wire (white/red/blue)
1 x Ventral support for AX-18/AX-60
1 x M2,5 5Diam metal ball link V3 (2 pcs)
1 x Blue smoke canister 100 g
1 x Green smoke canister 100 g
1 x 5 line servos wire black (1 m)
1 x Green smoke canister 65 g
1 x M2,5 5Diam short black ball link V2 (2 pcs)
1 x PVC 0,25 qmm servos wire Graupner (5 m)
1 x Aluminun wheel collar 4 mm Ø (4 uds)
1 x Remote electric ignition system
1 x 140 mm rods set for direction control
1 x Socket head ball link M3 (2 uds)
1 x Crankcase gasket DA 170
1 x Extension Ø25mm x L: 60 mm
1 x Diaphragm set for ZG 74/80B, DA85/100/100L/120/200, VM170/210
1 x Cylindergasket DA 170
1 x DJI Mavic Air Fly More Combo
1 x TS832 to Gopro AV/Power Cable
1 x Stainless Steel Muffler D.A. 35-70
1 x Reed valve petal for DA 60 carburator
1 x 3 mm metalic joint for DA-35 or DA-75 cilinder/elbow
1 x Menbrane joint for DA 50-R
2 x Gasket, from red carb carrier to crankcase DA-150L/170
1 x Stainless steel silencer for DA 85/170
1 x Exhaust gasket DA-35 and DA-70
1 x Joint for DA-50 reed valv
1 x Prop screw for DA50/60/70, VN60/70, M5x45
1 x Set Legs + Wheels with brake ASPIRE
1 x Reed valve cage with petals for DA 100/150
1 x Nose wheel 62 mm
1 x Woodruff key for DA50/85/100/150 and DA 200
1 x Gasket carburetor carrier->crankcase DA-85 DA-100L DA-120 DA-200
1 x Baffles for Radial Moki S250/330 mm
1 x 60 mm long Prop hub for ZG45SL, ZG62/S/SL and ZG80B
1 x Fixing Ring with Base 60 mm
1 x Fuel Fittings-Blue
1 x Red aluminium servo arm V1-Futaba 23 mm M2
1 x SE Ring HACKER 300 mm (2 pcs)
1 x Transmitter Balancer Futaba T-10CG
1 x Refueling Cap V3 Black
1 x Floating M3 washer pad (36 pcs)
1 x Fuel line plugs (Black)
1 x Soporte servo KST X10 mini / DS135MG
1 x Servo KST BLS915 HV V8.0 25Kg 20mm 78g
1 x CC 05
1 x Extension PVC 150 cm (Graupner)
1 x ABS "T" angle 8.0x8.0x1000 mm
1 x Cabel "Y" 30 cm (Futaba)
1 x GPS, Vario and altitude Sensor SBS-01G
1 x Power Box GPS Sensor III
1 x Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x Battery Protection Circuit Board 22.2v 6s
1 x Sanyo RX Battery Eneloop 4,8 V JR
1 x Spray adhesive INFUTAC (Clear) 500 ml
1 x PowerBox Battery 4000
1 x Male Prolonger TP 4/5S
1 x Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x Extension silicon 30 cm male (Graupner)
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x PowerBox Cockpit SRS (incl. SensorSwitch)
1 x ABS angle 6,0x6,0x1000 mm
1 x Battlife Guard 2s
1 x Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs)
1 x TrainerCord (master-learner)
1 x Soporte grifo FESTO (2 pcs)
1 x Soporte filtro FESTO (4 pcs)
1 x Anodized aluminium servo M4x5/8 screw (4 black pcs)
1 x Blind nut M6 (4 pcs)
1 x Exhaust gasket DA-150
1 x TX 250 mW especial GOPRO
1 x Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz
1 x CNC FPV Display screen&Transmitter Holder Vertical
1 x Prop washer DA-50R/60/70
1 x ‎Reed valve for DA-60/70
1 x Piston ring for ZG 20 and G240RC
1 x Reed valve carrier for DA-85, DA-100L and DA-120
1 x Covered closure or fairings
1 x Rear crankcase DA-50R
1 x Crankshaft DA-120
1 x Carburetor diaphragm set DA-150/170
1 x L ELBOW DA-150 "normal" (2 pcs)
1 x RB-45 Electronic
1 x Brake disc Electron Retracts
1 x Piston ring for DA-150
1 x Piston DA-85/170
1 x Cylinder Gasket set for DA-60 / DA-120
1 x Header ZG 45/62, "normal"
1 x Gasket carburettor/insulator for ZG 38/S/SC
1 x Cilinder joint for G230RC/G260RC
1 x Gasket carb - intake manifold for ZG 74B/ZG 80G
1 x Blue aluminium servo arm V1-Hitec 20 mm M2
2 x Floating M4 washer pad (36 pcs)
1 x SE Ring 300 mm (2 pcs)
1 x Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs)
2 x 10 mm floating pad (72 pcs)
1 x Transmitter Balancer Futaba FF9-DX7-JR-Hitec
1 x 20x1000 mm Ring Strap Back To Back
1 x Wing bolts M6 Steel screw Red (2 pcs)
1 x Fuel Fittings-Gold
1 x One touch canopy lock
1 x M3-M4 rubber washer (8 pcs)
1 x Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs)
1 x Deposito SECRAFT V2 1000 ml Gas
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs)
1 x Refueling Cup V2 Red
1 x Fuel line plugs (Red)
1 x Transmitter Balancer SPK DX-8
1 x SE Ring 350 mm (2 pcs)
1 x Switch Cap M (black)
1 x Red aluminium servo arm V1-Futaba 1,0" inch M2
1 x aluminium servo arm V1-JR 1,0 inch M2
1 x Switch Cap M (red)
1 x T- Fittings blue color (2pcs)
1 x 50N turbine start protection tube
1 x Carburator Moki S250
1 x Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13
1 x Motor Moki S 500 cc 5 cylinders
1 x Carburator Moki S400
1 x Motor MOKI S 350 cc 7 cylinder
1 x Batetia LiFe 3200 mAh 6.6v MPX PowerBox
1 x 500 ml sealer (DOPE)
1 x Release wax 250ml
1 x Profile ABS half cane 2.5x1000 mm
1 x Spannlack 1000 ml
2 x CC 03
1 x Extension silicon 30 cm male (Futaba)
1 x Gear for MICRO BB
1 x Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
2 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x U Profile ABS 8,0x4,0x1000 mm
1 x Futaba male 40 cm extension
1 x Connector Sub-D 2+5 Female
1 x Solvent Plasti Dip 1000 ml
1 x Cabel "Y" 30 cm (graupner)
1 x Hobbylite Filler, Balsa colour
1 x Sanyo RX Battery Eneloop 6,0 V JR
1 x PowerBox 12
1 x PSC 6
1 x PowerBox MAG Sensor
1 x Sanyo RX Battery Eneloop 6,0 V FUT
1 x Plasti Dip Liquid Tape 429 ml black
1 x Sanyo RX Battery Eneloop RX 4,8 V Futaba
1 x USB interface ALTIS
2 x 2 LiPo XH>EH adapter
1 x Sanyo TX Battery Eneloop 9,6 V Hitec
1 x T-Connector 4.0 mm x 1000 mm
1 x Sanyo TX Battery Eneloop 9,6 V 2500 mAh
1 x Partall paste 650 g
1 x Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x U Profile ABS 1,0x2,0x1000 mm
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x Blind nut M5 (10 pcs)
1 x Support pumb/filter Xicoy X45
1 x Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs)
1 x Angle support XT60 conector
1 x Gens Ace 25C 1200mAh 3S1P 11.1V Saddle Airsoft Gun Lipo Battery
1 x Blind nut M4 (10 pcs)
1 x Hexagonal Nut M1 (10 pcs)
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
3 x Support Flush MPX Conector (6 pcs)
1 x Circlik for shaft 1.9 mm (10 pcs)
1 x Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs)
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x 30 cm BEC cable (male)
1 x Adapter lead MPX/EC3
1 x Blind nut M3 (4 pcs)
1 x Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs)
1 x Cabel charger transmitter GRAUPNER
1 x Aluminium cap bolt washer M3 blue (8 pcs)
1 x Recessed MPX connector support (6 pcs)
1 x TP/TopFuel - XH 2/3S Adapter
1 x Anodized aluminium servo M4x5/8 screw (4 silver pcs)
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Hexagonal Nut M2.5 (10 pcs)
1 x Aluminium tube with fibreglass case ø35x1.5mm, 1m
1 x Aluminium cap bolt washer M3 red (8 pcs)
58,952.04EUR
Manufacturers
Manufacturer Info
Hacker
Hacker Homepage
Other products
Languages
Español English
Currencies