16.00EUR

Opto Gas Engine Kill Switch
[SETOKW]


This kill switch is double Optically Coupled to isolate your ignition system from your radio system (No Interference!!). It also consist an additional safety functions.

Device features
• Includes a remote mountable ultra bright LED to indicate when the ignition is armed or not, or if the safety sequence protection is active.
• The LED diode informs also if Fail-Safe occured during flight (even after landing).
• Safety sequence protection for engine ignition powering up after model preparation.
• Double optically Coupled input/output is Isolated.
• Turning engine ignition ON or OFF directly from RC Transmitter
• No need to use additional mechanical switch for disconnecting ignition battery.
• 8 Bit microcontroller powered directly from RC receiver.
• 3,0 - 24,0 Volt Li-Po/Li-Ion/A123/Ni-Mh/NiCad Input (receiver side).
• 3,0 - 20,0 Volt Li-Po/Li-Ion/A123/Ni-Mh/NiCad MOSFET Output (ignition side).
• Possible to use one battery setup (independent two batteries setup by default).
• Max. current output: 5 Amp continous, 16 Amp peak
• Fail-Safe engine kill when interference or signal lose is longer then 1 second. (this function can be turned OFF).
• PPM-PCM 2048 – 1024 & 2.4Ghz Interface Support.
• Low Voltage Drop – Less than 150mv.
• 100% Surface Mount Technology.
• Heavy Gauge Wires 22AWG, universal connectors Futaba/JR.
• Small and light weight – only 15 Grams!

This device plugs into a spare receiver channel.

This is a must have safety device for any gas powered plane! This device allows you to safely kill your engine at anytime (on the ground, or inthe air!)


temporarily out of stock
temporarily out of stock

Reviews

Customers who bought this product also purchased
Spark motor OS nº 3
Spark motor OS nº 3

temporarily out of stock
temporarily out of stock

We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Aluminium coupler M2,5/2 with ball bearing (1 pcs)
2 x Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Threaded coupler M3 (10 uds)
1 x Couple M4 for wire (10 pcs)
2 x Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x Aluminium blue ball links M3 V1 (10 pcs)
2 x Ball link Aluminio M3 (2 pcs)
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
2 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x Z type of cable coupler Ø 2 (2 uds)
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
2 x Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x Brass ball links BS M3 V1 (10 pcs)
2 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Angled clevis with threaded rod M3
2 x Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
2 x Z type of cable coupler Ø 1 (2 uds)
1 x Motor DLE 200cc Premium Muffler
2 x Big Crow DLE-170M
1 x Silent-blocks DLE 170M
1 x Propeller FALCON 32,5x11 PUSHER Carbono
1 x Motor DLE 170 M- Paramotors
1 x Small Crow DLE-170M
1 x Joint with bearing M2 22x5,5
1 x Short ball link M1.6 (6 uds)
1 x M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x 6 mm ball link M3 (10 pcs)
1 x M2 5Diam short black ball link V2 (2 pcs)
1 x Socket head ball link M3 (2 uds)
1 x M2/M1/6 3Diam long black ball link V1 (2 pcs)
2 x Socket head ball link M3 (2 uds)
1 x M2/M1/6 3Diam short black ball link V1 (6 pcs)
2 x Ball link M3 (10 pcs, flat ball)
1 x Long ball link M1.6 (6 uds)
1 x M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x Socket head long ball link M3 (2 uds)
1 x M2,5 Diam metal ball link V3 (2 pcs)
1 x Long ball link M3 (6 uds)
1 x Blue metalic ball link M3/3 azul (2 pcs)
2 x Long ball link M2 (6 uds)
2 x M2,5 Diam metal short ball link V3 (2 pcs)
1 x Short ball link M2 (6 uds)
1 x M2,5 5Diam black ball link V2 (2 pcs)
2 x Ball link M1.6 (6 uds)
1 x M3 INDUSTRIAL ball link (2 uds)
1 x Ball link M3 (6 uds)
1 x BALSA trip 5.0x5.0x1000 mm
1 x Initior Receiver FRX2 Wireless
1 x 1/4 Pilot "Heidi"
1 x Piloto Jet "Red" 1/6 Scale
1 x Tape GFK 25 mm
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x Crimping sleeves for 1.1 mm cable (10 pcs)
1 x Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Z type of cable coupler Ø 1.8 (2 uds)
1 x Pulley brass 2,5/1 (2 pcs)
2 x Turnbuckle M1,6x17/27 (2pcs)
1 x Support Pitot JETI
2 x Propeller POWER-PROP 7x7
1 x Support conector MPX (6 pcs)
1 x Turnbuckle M2x29/43 (2pcs)
2 x Threaded coupler M2,5 (10 pcs)
1 x Blue metalic ball link M2/2 azul (2 pcs)
1 x M2 5Diam black ball link V2 (2 pcs)
1 x Motor mount class 48"
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
2 x Motor mount VANQUIST 48" F3A
1 x Ball Link ALU M3 - RH (1 pcs)
1 x Hub DLE 30
1 x Muffler DLE 20-RA
1 x Piston ring for motor 58/116 cc
1 x DLE 55 Muffler
2 x Head Gasket 30cc (3 pcs)
2 x Rear cover O-ring 26/30 cc
1 x Cylinder-piston Assembly 30cc
1 x Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs)
1 x Pushrod greyline 4/3 with coupler M3
1 x Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs)
1 x PARTALL® Hi-Temp Wax, 340 g
1 x Motor DLE 430 cc - Paramotors
1 x Ball link M3 (10 pcs)
1 x Ball link M3 RPA's-UAV's
1 x Socket head long ball link M3 (6 uds)
1 x SLICK 360-B 104" (2640 mm)
1 x EDGE 540-A 91" (2310 mm)
1 x SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
1 x Sukhoi 29S 2,6 m,CF landing gear(SebART)
1 x Sukhoi 29S 2,6 m White/Blue (SebART)
1 x Cable coupler M2,5 (2 pcs)
1 x Fully Threaded Steel Rod M3
1 x Sebart 2.2 m WHITE/BLUE (SebART)
1 x ULTRA STICK 30 cc ARF
1 x ARS 300 91" ARF 2311mm ORANGE
1 x SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
1 x EDGE 540 1.73m SEAGULL Model
2 x SLICK 360-A 104" (2640 mm)
1 x EDGE 540-A 105" (2660 mm)
1 x EXTRA NG 74" white/red/blue (Skywing RC)
1 x PITTS CHALLENGER 87″ 2.20m (120cc) 02 ARF
2 x EXTRA 330L 35% hardware pack (Precision Aerobatics)
1 x Cable coupler M3 (10 uds)
1 x Cable coupler M2 (10 uds)
1 x BRASS CONTROL HORN M3x16 mm 2pcs
1 x Interface Jack Adapter IKARUS
1 x Flap hinge (6 pcs)
1 x Aluminium sheet 500x250x0,5mm
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x DLE Ignition 111/120/170
1 x SERVO DES 588 BB MG
1 x Civilian pilot "Pamela" size 9cm (Slimline)
1 x 500 ml sealer (DOPE)
1 x Plasti Dip Liquid Tape 429 ml black
1 x Propeller POWER-PROP 14x9 Izda
1 x Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x Wing Joiner ULTIMATUM 2.0 m
1 x Actuador lineal HLS12-100210-7.4v
1 x Plasti Dip Liquid Tape 429 ml black
1 x IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD
1 x Nose OPTIMA 2.200 mm (Elec or Glider)
1 x Esc KOSMIK 160+ HV COOL
1 x 40,0 mm hydro-propeller (left hydropropeller)
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Carburetor DLE 170M
1 x Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
1 x Fully Threaded Steel Rod M2,5 (2 uds)
1 x Carburetor DLE 170
1 x DLE 85/111/120 Crankshaft keyway
1 x Pilot "Duke" Legends Series (Slimline)
1 x Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x Civilian pilot "Gramps" size 9cm (Slimline)
1 x F1 Prop Cap Can (Fuel Container Conection)
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x DUPLEX 2.4EX Central Box 210
1 x Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x Slave-cable USB Easy Sim
1 x MXS-C (Mini) Blue
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x EXTRA 300L 1.2 m Deep Purple
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x YAK-23 "FLORA" (RBC Kits)
1 x FIALA Propeller 24x12
1 x EDGE 540-A 74" (1880 mm)
1 x 18x8 BIELA 3Bl propeller (3-blades)
1 x FIALA Propeller 23x10
1 x Carbon plate 350x150x3.0 mm
1 x EDGE XL Orange
1 x REVOLTO Blue
1 x RV-8 ARF 70cc rojo/blanco/azul
1 x Motor Set CHALLENGER Indoor
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x SF260 SIAI MARCHETTI 50E yellow/black (SebArt)
1 x Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x 16x8 BIELA propeller (3-blades)
1 x FIALA Propeller 24x10
1 x Propeller APC 16x8 Glow/Gas
32,165.66EUR
Manufacturers
Manufacturer Info
SETLO
SETLO Homepage
Other products
Languages
Español English
Currencies